

How's your sourdough starter doing? Fresh sourdough starter is a wonderful resource. Bread, pancakes, waffles, cake... there are so many delicious directions you can take with sourdough. The key: maintaining your sourdough starter so that it's healthy, happy, and ready to go when you are.
Once you've successfully created your starter, you'll need to feed it regularly.
If you bake a lot of sourdough treats, you may want to keep it on your counter, at room temperature. While this means feeding it twice a day, it also means your starter will be ready to bake with at the drop of a hat (er, oven mitt).
However, many of us don't want the commitment of twice-a-day feedings. If you're a more casual sourdough baker, it's possible to store your starter in the refrigerator, feeding it just once a week.
Let's take a look at both methods.
But first, a word of advice. Sourdough baking is as much art as science. This method for maintaining sourdough starter is just one of many you might choose to follow. It might not exactly match what you read in your favorite online bread forum, or what your neighbor down the street does.
And that's OK. If you have a process you've successfully followed before, then hey, stick with it. Or try this one and compare. All good.
Room temperature is the best environment for the yeast and lactobacilli that inhabit your starter, and you can learn a lot about your starter by observing a twice-a-day feeding regimen with the starter at room temperature.
If you're willing to maintain your starter at room temperature by feeding it twice a day, here's how.
Stir the starter well and discard all but 1/2 cup (4 ounces, 113g).
Add about 1/2 cup (4 ounces, 113g) room-temperature water (hereafter known simply as "water") and a scant 1 cup (4 ounce, 113g) King Arthur Unbleached All-Purpose Flour (hereafter known simply as "flour") to the 1/2 cup of starter.
Mix until smooth, and cover.
Your starter will bubble and grow until it's doubled (or more) in size...
...then will gradually sink as it awaits its next feeding. Repeat this feeding process every 12 hours.
This whole process will take anywhere from a couple of hours to all day, depending on the health of your starter and the temperature of your house: the colder the environment, the more slowly your starter will grow. If the normal temperature in your home is below 68°F, we suggest finding a smaller, warmer spot to develop your starter.
The ideal solution is a folding bread proofer, which can be programmed to exactly 70°F, sourdough starter's favorite temperature.
Absent that, I like to set starter in my cold oven with just the oven light on. Over time, the light will raise the oven's temperature to 90°F. Since I don't want it quite that hot, I'll turn the light off after an hour or so —however long it takes to reach 70°F — then turn it back on again if necessary.
Caveat emptor: If your starter's resting in the oven, put a reminder over your oven controls lest you inadvertently start preheating it with the starter inside! Been there, done that...
Other options: Set your container of starter atop your water heater, refrigerator, or another appliance that might generate ambient heat, or near a heat source (baseboard heater, etc.). Or place it on a folded dish towel laid atop a heating pad on its lowest setting.
For most home bakers, daily feeding is impractical; so you'll need to store your starter in the refrigerator and feed it once a week.
Take the starter out of the fridge. If you're feeding it weekly, it will probably appear a bit frothy. There may be a bit of light amber or clear liquid on top. Either drain this off or stir it in, your choice; it's alcohol from the fermenting yeast.
Remove all but 4 ounces (113g) starter. Use this “discard” to make pancakes, waffles, cake, pizza, flatbread, or another treat.
Or, simply give to a friend so they can create their own starter.
Add 4 ounces (113g) room-temperature water and 4 ounces (113g) flour to the remaining starter. Mix until smooth, and cover.
Allow the starter to rest at room temperature (preferably about 70°F) for 2 to 4 hours, until it shows signs of life; this gives the yeast a chance to warm up and get feeding. Once it's started to bubble, refrigerate it.
If your starter has been refrigerated, you’ll want to raise its activity to a more energetic level. You can do this by giving it a series of feedings at room temperature, anywhere from a couple over the course of a day to two feedings a day for several days, depending on how healthy it is.
Take the starter out of the fridge, discard all but 4 ounces (113g), and feed it as usual with 4 ounces (113g) water and 4 ounces (113g) flour. Let it rest at room temperature for about 8 to 12 hours, until bubbly.
Repeat as necessary, every 12 hours, until you notice the starter doubling or tripling in volume in 6 to 8 hours. That means it’s strong enough to leaven bread.
For the final feeding, make sure you add enough flour and water to use in your recipe, with a little left over to feed and maintain the starter for the next time you bake.
For instance, if your recipe calls for 1 cup (about 8 ounces, 227g) starter, add 4 ounces (113g) each water and flour. If your recipe calls for 2 cups (about 16 ounces, 454g) starter, add 8 ounces (227g) each water and flour.
Once the starter is bubbling and vigorous, remove what you’ll need for the recipe and set it aside. Feed the remaining starter with 4 ounces (113g) flour and 4 ounces (113g) water. Mix until smooth, and allow the starter to work for about 2 to 4 hours at room temperature, until it shows signs of life, before putting it back in the refrigerator.
Feed with half whole-rye (pumpernickel) flour or whole wheat flour for a few days. The extra nutrition in the bran and germ can increase the starter’s acidity.
Be sure your starter has a chance to ripen (develop) fully before it receives another feeding; before you use it in a recipe, or before refrigerating it. An ideal feeding regimen for a starter kept at room temperature (in the low 70s) is two feedings a day at 12-hour intervals.
You may be letting the starter ripen too long before using it. Once your starter is bubbling and vigorous, it’s time to make bread, feed it again, or refrigerate until its next feeding. Don't let it become bubbly, rise, and then fall and start to "calm down;" that's adding acidity to its flavor. Reduce the duration of ripening as necessary.
Also, try ripening your starter in a slightly cooler area, so it doesn’t digest its meal of flour and water too quickly.
Sometime you may find yourself with a starter that’s gone far too long without a feeding. Covered in a clear, dark liquid (alcohol, a by-product of yeast that's been deprived of oxygen), the starter will lack bubbles or other signs of activity, and will have a very sharp aroma.
The starter may even have dry skin on top, usually gray or brown in color. Skim off and discard the skin; it's not harmful, but will discolor your starter. Although at this point the starter appears lifeless, its microflora will spring into action again as soon as they get a few good meals.
Stir the liquid back into the starter. Discard all but 4 ounces (113g), and set the bowl or crock on the counter; you’re going to be leaving it at room temperature (at least 70°F) for awhile.
Feed the starter 1/2 cup (4 ounces, 113g) water and a scant 1 cup (4 ounces, 113g) all-purpose flour twice a day, discarding all but 1/2 cup (4 ounces, 113g) of the starter before each feeding.
It should soon become healthy, bubbly, and active.
Sourdough starters are hearty, and easily resist spoilage due to their acidic nature. The pH of a sourdough starter discourages the proliferation of harmful microorganisms.
However, living creatures sometimes get sick, be they humans, pets, or even sourdough starter. If your starter turns ominously pink, orange, or red; shows signs of mold growth, or smells decidedly putrid, throw it away and begin again. Luckily, in our experience, this rarely happens. But for more information see our post, Sourdough starter troubleshooting.
OK, after all of that — how about baking some sourdough bread? Our Rustic Sourdough Bread is a great place to start.
Or for "true" sourdough, without any added yeast, try our Naturally Leavened Sourdough Bread.
Want to make your own homemade starter from scratch? Read our post on creating your own sourdough starter. And for easy access to just about everything we've learned about sourdough baking here at King Arthur Flour (and are eager to share with you), see our sourdough baking guide.
May 11, 2021 at 9:53pm
In reply to Yes, Princess. But make sure… by jfrishtick
Thank you so much!
March 17, 2021 at 11:32am
Hi! How do you share a starter, bake a loaf, and keep a starter for yourself all at the same time? I just want to make sure I have enough to share and to keep and bake.
March 18, 2021 at 9:18am
In reply to Hi! How do you share a… by Katelin (not verified)
Hi Katelin! If you'd like to share your starter, just save some of the discard that is created from feeding your starter prior to baking or from regular maintenance feedings. Then when you gift the starter, just include instructions on feeding! This should put you in a good place to have enough starter to bake your bread and still have enough culture left to keep going after taking what you need for the recipe. If you need to increase the amount of starter you have on hand for a recipe, just simply feed the starter without discard — this is called a "build". We hope this helps!
March 10, 2021 at 1:10pm
Can you feed your starter with only pumpernickel or whole wheat flour. I would not like to use all purpose flour at all
March 12, 2021 at 4:30pm
In reply to Can you feed your starter… by Jenna Helms (not verified)
Hi Jenna! You sure can feed your starter with whole wheat or pumpernickel flour! The biggest difference with feeding your starter whole wheat flour vs. all-purpose is that you should expect it to ripen faster (and start to smell sour and tangy more quickly). This is normal. If you continue feeding the starter with whole wheat flour, you'll find it ripens quickly unless you put it someplace cool to slow down that fermentation; such as the fridge. If you don't keep up with a whole wheat starter, then it can become over-ripe faster than you might like. As for baking with it, you can still use your whole wheat starter the same way you have been without adjusting the flour or water in the rest of the recipe; 1 cup weighs roughly 227 grams. Enjoy!
February 28, 2021 at 4:01am
Hi! It's been 22 days since i made my wholewheat starter. It's hot here in India and somehow, my starter felt too thick at 1:1:1. So, i changed my water to 1.25 and it doubles in 8-9 hrs. Is it ok to increase water? How can i check if it is ready to bake.. Most online portals say that wheat starter should double in 4 hrs, for it to be ready to bake.
Thanks!!
March 2, 2021 at 12:03pm
In reply to Hi! It's been 22 days since… by Namita (not verified)
Hi, Namita! If your starter is doubling in volume, it is ready to bake with. Starters are living things, and each one is unique. Some double in size after 6 hours, some in 12 hours, and most somewhere in between. The consistency should look similar to pancake batter, and whole wheat flour does absorb a bit more liquid than all-purpose flour does, so do feel free to add a little more water if you find that it's too stiff and dry. Happy baking!
February 20, 2021 at 4:35am
Thank you for this very informative article! I just started baking with sourdough and after baking my first loaf, stored my starter in the fridge. I restored it for my second loaf, and everything worked fine.
My question: I left the starter I didn't use out over night, it is 9.30 am now, and it is flat and bubbly now (as usual at this stage, I fed it at 4 pm the previous day). Can I feed it just now and then put it back in the fridge? I'm obviously past the 12 hour mark and can wait until 4p.m. for the 24 hour mark.
February 28, 2021 at 2:24pm
In reply to Thank you for this very… by Johanna (not verified)
We're glad you enjoyed this article, Johanna! You sure can feed your starter now and pop it back in the fridge, no need to wait for the 24-hour mark. Happy baking!
February 17, 2021 at 11:16am
I've been maintaining my starter for several months now and have made quite a few different (and good!) bread recipes. Today, I came across a blog on this website that differentiates between 'liquid' and 'stiff' starters. Most of the specific webpages you have for creating and maintaining your starter follow a 'stiff' recipe for feeding, i.e. twice as much flour as water. After reading these blogs, I know why my starter has been 'stiff' - something I had noticed earlier by looking at the various photos you all have posted of starters in comparison to how my starter always appeared. What are the pros and cons of maintaining my starter as 'stiff' as opposed to more 'liquid'?
Pagination